How To Assemble your Daggerfish Display

1. Your Daggerfish Display comes with the following components:

  • 2 upright supports
  • 1 upright brace bar
  • 1 display backing
  • 15 locking wedges
  • 6 upper holders (larger)
  • 6 lower holders (smaller)

2. Add the upper holders to the display backing using the locking wedges

Insert the upper holders into the display back, and lock them in place with the locking wedges. You do not need to press the wedges in all the way, just until they are snug. Wiggle the wedges and the holders a little to ensure a tight fit.

3. Add the lower holders to the display backing using the locking wedges

Insert the lower holders into the display back, and lock them in place with the locking wedges. Again, just press until the wedges fit snugly.

4. Choose a stand-up or lay-back style of display

For a stand-up display, insert the upright supports with their wider ends facing towards the bottom of the display. Slot the supports in place in the display back, and then thread the brace bar between the supports. Lock the brace bar in place using two locking wedges.

For a lay-back display, reverse the position of the uprights so that the wider end is facing the top of the display. Slot the supports in place in the display back, and then thread the brace bar between the supports. Lock the brace bar in place using two locking wedges.

You can change from an stand-up to a lay-back display at any time, by removing and reversing the uprights.

5. Load up with Daggerfish products and place on display!

Daggerfish products do well in retail settings next to items backpacking, paddlesports, and gift items, as well as adjacent to other handcrafted products like knives and hatchets. They also work well as upsells with paddlecraft purchasees.